Cruise control BUG
Cruise control BUG
I have a small problem with my thesis, the engine is 2.4 jtd 20v, the problem is in the cruise control, if I turn it on when the car is turned on, the lamp lights up on the instrument panel and it works, I adjust the speed and it works for a while until I turn it off, the next time I can not turn it on until I shut down the car and again start on car,he work a little and again disappears ... I checked the clutch switch and the brake switch cleaned both of them and sprinkled the spray contact, but all the same again, what could I check next?
I found a similar topic here but I did not solve the problem with the help of it, the thesis is a great limousine and this is a stupid problem.
Soon I will present my car and upload pictures.
Sory for my bad english...
I found a similar topic here but I did not solve the problem with the help of it, the thesis is a great limousine and this is a stupid problem.
Soon I will present my car and upload pictures.
Sory for my bad english...
Re: Cruise control BUG
No one has an idea?
- pawel1234
- Forumowicz/ka
- Posty: 378
- Rejestracja: 11 sie 2009, 12:50
- Imię: Paweł
- Lokalizacja: Brwinów/k.Warszawy
Re: Cruise control BUG
Have you got program Multiecuscan and cable to diagnose Thesis ?
In MES probably you will see what is the problem
Maybe you have to do alignment PROXY in this program ?
In MES probably you will see what is the problem
Maybe you have to do alignment PROXY in this program ?
Lancia Lybra 2.0 COMFORTRONIC
Lancia Ypsilon 0.9 Automat 2016r.
Lancia Ypsilon 0.9 Automat 2016r.
Re: Cruise control BUG
the diagnostics is saying the overfilling of the turbocharger-p0235, and the bright chek engine, we clear it but it came back, I did not know how to repair it, can cruise control don't work because that? Thank you for try me to help
- pawel1234
- Forumowicz/ka
- Posty: 378
- Rejestracja: 11 sie 2009, 12:50
- Imię: Paweł
- Lokalizacja: Brwinów/k.Warszawy
Re: Cruise control BUG
Maybe You should do alignmnent PROXY in MES...
Maybe?
Do You have MES?
Maybe?
Do You have MES?
Lancia Lybra 2.0 COMFORTRONIC
Lancia Ypsilon 0.9 Automat 2016r.
Lancia Ypsilon 0.9 Automat 2016r.
Re: Cruise control BUG
I don't have MES and i don't know who have a MES...my repairman have a Delphi diagnostic..
- pawel1234
- Forumowicz/ka
- Posty: 378
- Rejestracja: 11 sie 2009, 12:50
- Imię: Paweł
- Lokalizacja: Brwinów/k.Warszawy
Re: Cruise control BUG
You have to buy a cable for Lancia thesis. ELM cable with Red, yellow and green plugs. When you buy it, tell me and i show how to get MES program
Or tell your mechanic to make alignment PROXY( i dont know how to say it in English) on Delphi diagnostic.
Or tell your mechanic to make alignment PROXY( i dont know how to say it in English) on Delphi diagnostic.
Lancia Lybra 2.0 COMFORTRONIC
Lancia Ypsilon 0.9 Automat 2016r.
Lancia Ypsilon 0.9 Automat 2016r.
-
- Forumowicz/ka
- Posty: 432
- Rejestracja: 11 gru 2015, 13:15
- Imię: Damian
- Lokalizacja: Ślunsk z przypadku.
Re: Cruise control BUG
MES stands for Multi Ecu Scan. You can buy this program or download... not quite legal. But it'll work anyway.
Re: Cruise control BUG
Thank you friends,i try it tomorrow and post the result.